SILICONE TRANSFORMER FLUID (SCC SF 50TF1)
| Appearance |
Crystal clear liquid |
| Density at 25°C (77°F) |
0.87 |
| Viscosity at 25°C (77°F) |
40 |
| Water content |
30 |
| Specific heat |
1.51 |
| Viscosity Index |
121 |
| Pour Point |
-33 |
| Breakdown voltage |
40-50 |
| Permittivity at 25°C (77°F) – 50Hz Dissipation |
2.7 |
| Volume resistivity at 25°C (77°F) ohm.cm |
1.0x1014 |
| Flash point (ASTM D92) |
>272 |
| Aromatics |
>02 |
| Packaging |
200 Kg Drum |
| Shelf Life |
2 Years |
DESCRIPTION : SCC-SF 50TF1 Transformer Liquid is a polydimethyl silicone liquid that meets the requirements of:
International Electrotechnical Commission (IEC) 836 “specifications for silicone liquid for electrical purposes” (Silicone Type T-1). ASTM D 4652-92 “silicone fluids for electrical insulation”. IEC 1100 – “Classification of insulating liquids according to fire point and net calorific value” (Class K3). With excellent electrical insulation properties over a wide temperature range, combined with high thermal stability, SF 50TF Transformer Liquid is suitable for transformers and other electrical equipment designed to operate at high temperatures or at very low temperatures.
APPLICATIONS
- Meets the requirements of both IEC 836 and ASTM D 4652-92
- Essentially non-toxic
- Environmentally safe
- Non-halogenated
- Compatible with a wide range of solid electrical insulating materials
- Contains no additives
- Classified as non-hazardous
- High thermal stability and oxidation resistance
- Higher fire point and lower heat release rate than other types of class K insulating liquids
- Good electrical properties and operating capabilities over a wide temperature range
STORAGE & HANDLING
It is recommended that normal safety precautions be taken while handling the product. The material should be stored in original containers in a cool place and protected from direct exposure to sunlight .
LIMITATIONS
These products are neither tested nor represented as suitable for medical or pharmaceutical uses. The information provided to the customers in this data sheet is intended as a guideline and is provided in good faith. Changes may occur from system to system as methods of use and conditions are beyond our control, hence users are requested to evaluate the recommendations before actual application to get desired performance. Supreme Chemicals Co.’s sole warranty is that the product will meet the Co.’s sales specifications in effect at the time of shipment. Supreme Chemicals Co.specifically disclaims any other express or implied warranty of fitness. Supreme Chemicals Co.disclaims liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to infringe any patent.
PACKAGING
200 Kg HDPE Drums
SHELF LIFE
24 months in the original container
All product specifications are subject to change without prior notice.